Step frame chassis with dual tire SAF axles, air suspension, disc brakes
Wabco brake system with ABS
Goodyear premium tires, 8x 265/70 R19.5

Body fabricated from 60 mm GRP sandwich panels with polyurethane filling and outer polyester skin, produced by Pecocar (Netherlands)
External dimensions (LxWxH): 14000 x 4000 x 2550
Internal height: 3000 mm
Internal width: 2440 mm
Loading height: 960 mm
King pin height: 1140 mm

Stella Shapeline design with rounded front wall

Dhollandia 2500 kg tail lift with integrated tail lights and self-folding safety delimitations

Length: 3500 mm plus 1100 mm slide- out extensions

Lift entry width: 2240 mm

Full floor, garage length (9.5m), manually adjustable 2nd car deck, including:
– 6 individually adjustable sections
– circle rubber surface finishing
– four rows of captive track load locks
– direct access, no access bridge required

Main floor covered with non-slippery circle rubber flooring

Captive track load locks, floor integrated, 4 lines per garage length

Captive track load locks, wall mounted, 4 lines per garage length on both sides (upper and lower decks)

Protective rubber lines on walls, 4 lines on each side per full length

LED lighting integrated in the deck rails with a two zone switch

Power sockets (6 units)

Removable cover on exterior door internal staircase

Optional items:

Air compressor, 230VAC, approx. 1.5kW power, with 50L receiver tank; with installation and airlines for up to 6-8 Staubli-type air connections distributed within the trailer

A protective 12-14 cm height stainless steel sheet for protecting the garage area walls; installed around the perimeter of the ground floor walls;

Removable folding workbench; approx. 1600x600mm; for up to 80kg payload; with storage in the underbody compartment

Race office interior fit out including:

Office room partition wall with TV installation

Meeting desk with folding seats for 8 engineers; with power, USB sockets, and RJ45 connections for each position; up to 4 HDMI connections across the desk

Engineering desk for four engineering positions; with storage cabinets under the worktop; with integrated power connections in the storage; 4x RJ45 and 4x USB-C connections; with mounts for 27inch monitors; includes 4x comfort seats

Drivers seating area along the front wall; comfort with backrest; made of artificial leather; includes a small fixed position desk with 2x USB-C and 2x power sockets

Wall mounted storage cabinets above engineering desk

Storage cabinets in the entrance pop-out, including wall cabinets, full height cabinets and wall mounted cabinets

High quality PVC/vinyl floor finishing

Wall, ceiling finishing with automotive leather

Electric and USB sockets (up to additional 6-8 sockets around the office)

General LED lighting (two-three zones)

Decorative LED lighting (two-three zones)

Office windows (automotive glass R43), fixed, double glass, Stella Works Shapeline design decorative glass finishing outside, integrated into the wall

Active office ventilation with filter, 220VAC

Interior design services

Expanding sides for office room, up to 3 meters length, expansion drive of 100 cm, hydraulic drive with control panel, custom office layout and fit out; flat floor with no internal step;

Hydraulic auto-leveling trailer jacks operated with the same control panel

Exterior doors in the pop-out, entrance width ~700 mm; with slide-out staircase under the pop-out; includes removable hand rails;

Office area air conditioning with one internal unit, approx. ~3.5kW cooling/heating; external AC unit mounted between chassis rails (Daikin) with folding cover

CEE 5 pole 32A 400V power input with switch

CEE 3 pole 32A 230V power input with switch

Input selector

Power distribution, fuse box

2x 175Ah AGM battery (Victron Energy)

230VAC, 80 Amp smart battery charger (Victron Energy)

Battery monitor (Victron Energy)

24V/24V converter for LED light installation

Battery charging connection to the tractor head, including battery to battery charger (400W)

Fireco CS 35-23 mast
Extended height: 7.9 m
Retracted height: 2.17 m
Top payload: 40 kg;
Pneumatic compressor mounted in the underbody compartment;
Remote controller with connection in the underbody compartment;
Mast installation inside the office in a special storage cabinet with access doors;
Rooftop opening with closing cover for mast operations;

Exterior ambient lights (3+3+2), Labcraft Led Scenelite
Spare wheel with mounting in the underbody compartment
Operational rooftop, includes special slider safety rail installed in the middle of the roof for secure operator attachment and non-slippery roof finishing; special portable roof ladder for accessing roof top from a raised lift with storage location inside the trailer

Ubiquiti UniFi Switch Pro Max 16 or similar network switch with optical connections
APC SRT1500XLI APC Smart-UPS SRT 1500VA 230V
Ubiquiti UniFi AP-AC Pro (or similar) Wi-Fi Access Point
Samsung QE55QN90DAT – 55″ Diagonal Class QN90D Series LED-backlit LCD TV or similar 55″ TV with installation

Network connection panels; protected with cover and with weather sealed connectors for:
RJ45 connections;
Fiber optics connections;
230VAC power;
Total two units under the gooseneck on each side of the trailer